全部
  • 全部
  • 产品管理
  • 新闻资讯
  • 介绍内容
Solution Case

Mobile Power Supply Vehicle

Product Parameter

ParameterValue
Curb Weight12 tons
Overall Dimensions (L×W×H)4.7m×2.6m×2.7m
Drive Configuration4×4
PowertrainPMSM + Gearbox
Max. Travel Speed0-30 km/h
Wheelbase3000mm
Track Width1800mm
Minimum Ground Clearance410mm
Max. Gradeability30°
Battery Capacity2×400Kwh
Battery Pack Weight2×3.5 tons
Cable Reel Length30m

 

Product Features
1.Rapid Recharging
Dual 400kWh batteries support 4-gun simultaneous charging (2×240kW piles), fully charged in 2 hours. Powers excavators for 4-5 hours of continuous operation.

2.Intelligent Control
High-voltage interlock DC output (600V); Real-time monitoring via CAN bus + WIFI-CAN wireless communication.

3.Robust Adaptability
Reinforced off-road chassis + dual-row tires (optional tire protection chains) for superior climb/damping performance.

 

4.Safety Assurance
FOPS/ROPS-certified cab; Constant-tension hysteresis reel prevents cable/vehicle damage.

5.Multi-Scenario Compatibility
Compatible with cable-towed excavators, battery-electric excavators, dual-power excavators, electric dozers/loaders, and agricultural machinery.
6.Cost Efficiency
5000-hour fuel-electricity cost equilibrium: Total ownership cost matches diesel equipment within 1-1.8 years (at 5000 operating hours/year). (Subject to fuel/electricity price fluctuations)
Core Components
1.Chassis System
Reinforced frame for 12-ton wheeled excavators; Dual-row off-road tires with optimized center of gravity.

2.Battery System
2×CTB-400kWh modules (800kWh total) with integrated liquid cooling; Dual rear charging ports for fast charging.

 

 

3.Drive System
Weiteli 120kW direct-drive motor + Liufeng 913 drive axle (21.449 ratio), gearbox-free design.

 

 

Customer Success
This is a case from a mining customer. By deploying trolley-type, large-tonnage electric crawler excavators (converted from diesel models) alongside Jingong mobile charging vehicles, a mobile energy replenishment solution was implemented using three charging vehicles to support two 50-ton electric excavators. Compared to diesel-powered equipment, the combination of electric equipment and mobile charging demonstrated higher cost efficiency, enabling the customer to achieve payback within a 1.5-year time frame. Subsequently, it delivered greater economic benefits, while producing zero emissions and lower noise – contributing to the protection of operators’ occupational health.

 

Product Materials